Yep, we may get a tiny thank-you (read: commission) when you buy through
links on Gadgetspotr — not enough for a yacht, but enough to keep the lights (and
servers) on.
Learn more
35
Highlights
58
Differences
10
Reactions
0
Likes
ANYCUBIC Kobra 2 Neo
vs
Creality Ender-3:
35 Highlights & 58 Differences —
So, Which 3D Printer Actually Works Better
Two popular 3D printers with different strengths; choose what matters most to you: convenience or custom upgrades.
Trying to decide between ANYCUBIC Kobra 2 Neo and Creality Ender-3? This side-by-side comparison covers the width, folded width, folded height & operating temperature range and extras that actually matter in a 3d printers.
ANYCUBIC Kobra 2 Neo Vs Creality Ender-3: A Comprehensive 3D Printer Duel
Both the ANYCUBIC Kobra 2 Neo and the Creality Ender-3 serve as accessible FDM/FFF 3D printers primarily geared towards consumers and beginners aiming to explore prototyping and miniatures. Both models require assembly and feature a single extruder system with a comparable build volume of around 740 cubic inches. However, the Kobra 2 Neo, launched in 2023, incorporates modern conveniences such as automatic bed leveling, filament runout sensors, and a direct drive extruder system, contrasting with the Ender-3's more manual setup and traditional Bowden extruder format, released in 2018. They also differ in printing speed, supported materials, and feature sets, which will be pivotal for users weighing their choices.
The Cutting-Edge Appeal of the ANYCUBIC Kobra 2 Neo
The ANYCUBIC Kobra 2 Neo stands out with its futuristic design and user experience. Sporting a sizable 4.3-inch touchscreen, this Cartesian printer excels in ease-of-use. Its auto bed leveling and integrated filament runout sensor eliminate much of the guesswork and interruptions common in 3D printing. The direct drive extruder further improves printing versatility, especially with flexible filaments like TPU, a known challenge in Bowden-based printers.
In terms of raw performance, the Kobra 2 Neo boasts an impressive maximum print speed of 250 mm/s and an effective print speed of 150 mm/s, significantly beating the Ender-3's 180 mm/s max and 60 mm/s effective speed. This results in dramatically reduced print times; for instance, printing the classic Benchy model takes just 17 minutes versus 90 minutes on the Ender-3.
The printer's capacity to handle higher temperatures, with a max extruder temperature of 500°F and a 230°F heated bed, allows for compatibility with more advanced filament types. In contrast, the built-in filament dry box helps maintain filament integrity in humid environments.
Furthermore, the Kobra 2 Neo offers power loss recovery and safety features, including automatic shutdown on errors, underpinned by certifications like UL, CE, and FCC. Its internal power supply provides a robust 400W output, accommodating its higher demands.
Ender-3: The Veteran with a Proven Workflow
The Creality Ender-3 has earned its reputation as a reliable workhorse over years of service in the consumer 3D printer market. Its slightly lighter frame weighs 15.21 lbs and features a more compact build-to-printer size ratio of 26.83, indicating efficient use of space for its build volume.
While it lacks automatic bed leveling, it compensates with manual calibration options, appreciated by hobbyists who enjoy tweaking for precision. The Ender-3's Bowden extruder setup is less suited for flexible filaments. Still, it excels at standard materials, especially given its broad filament compatibility, supporting specialty and engineering materials such as Nylon, Carbon Fiber, PC, and Wood blends. This versatility, combined with the use of third-party materials, makes it ideal for users experimenting beyond basics.
Though it runs slower, with a maximum print speed of 180 mm/s and an effective speed of 60 mm/s, its print recovery feature helps reduce setbacks from power interruptions. At the same time, noise levels are comparable to the Kobra 2 Neo.
Ender-3 also enjoys a wide ecosystem of mod kits and upgrade options, including enclosures, laser engravers, multi-material setups, and CNC add-ons, offering ample room to customize and expand. Its external power supply and 270W consumption make it more energy-efficient at standby and in operation, which appeals to environmentally conscious users.
Quick Take
For blazing print speeds and user-friendly automation, the ANYCUBIC Kobra 2 Neo is a strong contender, especially beneficial for beginners who value convenience and modern features like automatic leveling and flexible filament handling. Meanwhile, the Creality Ender-3 shines with its broad material compatibility and a flexible upgrade path, catering to hobbyists and makers who enjoy hands-on calibration and customization.
Bottom Line
Choosing between these two hinges on your priorities. The ANYCUBIC Kobra 2 Neo leads in speed, ease of use, and handling flexible materials, making it the go-to for fast, hassle-free printing. The Creality Ender-3 fits best if you want a proven, affordable 3D printer with extensive upgrade potential and material versatility, perfect for tinkerers who don't mind manual setups.
Verdict
Winner:ANYCUBIC Kobra 2 Neo - Superior print speed, user-friendly automation, and flexible filament capability.
Runner-up:Creality Ender-3 - Wide filament compatibility, extensive mod ecosystem, and lower power consumption make it a budget-conscious, customizable classic.
Ready to invest? The ANYCUBIC Kobra 2 Neo is competitively priced at $166.67 at store.anycubic.com, making advanced technology accessible for newcomers seeking a smooth and rapid build experience.
Side by side. The numbers. The features. No drama.
We dove deep into ANYCUBIC Kobra 2 Neo vs Creality Ender-3 — every major spec, performance test, and design callout is here to help you pick the right 3d printer.
ANYCUBIC Kobra 2 Neo supports 'Prototyping, Miniatures' applications, while Creality Ender-3 extends its support to 'Prototyping, Miniatures, Engineering', covering more professional uses.
Lists the most common applications supported.
In the battle of Supported Applications,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Supported Applications on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Printer Type
What type of printer is it?
0
ANYCUBIC Kobra 2 Neo
0Votes
FDM/FFF
0
Creality Ender-3
0Votes
FDM/FFF
Creality Ender-3
This printer operates using the FDM/FFF (Fused Deposition Modeling / Fused Filament Fabrication) technology. It builds objects layer by layer by extruding melted thermoplastic filament.
Defines the printing technology used by the machine.
In the battle of Printer Type,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Printer Type on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Target User Level
What is the target user level?
0
ANYCUBIC Kobra 2 Neo
0Votes
Beginner
0
Creality Ender-3
0Votes
Beginner, Intermediate
vs
Target User Level
The ANYCUBIC Kobra 2 Neo is targeted at 'Beginner' users, while the Creality Ender-3 caters to 'Beginner, Intermediate' levels, suggesting it can grow with the user.
Indicates the recommended skill level.
In the battle of Target User Level,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Target User Level on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Release Year
What is the release year?
0
ANYCUBIC Kobra 2 Neo
1Votes
2023
0
Creality Ender-3
0Votes
2018
vs
Release Year
The ANYCUBIC Kobra 2 Neo was released in 2023, making it a significantly newer model than the Creality Ender-3, which was released in 2018.
The year the 3D printer was first released.
In the battle of Release Year,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Based on community votes for Release Year,
ANYCUBIC Kobra 2 Neo ◉ earned
1 votes,
more than
Creality Ender-3 ◉,
which got 0 votes.
In the battle of Product Name,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Product Name on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Model Number
What is the model number?
0
ANYCUBIC Kobra 2 Neo
0Votes
Kobra 2 Neo
0
Creality Ender-3
0Votes
Ender-3
vs
Model Number
The Model Number for ANYCUBIC Kobra 2 Neo is 'Kobra 2 Neo', while the Creality Ender-3 is identified as 'Ender-3'.
Manufacturer’s reference code for precise identification.
In the battle of Model Number,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Model Number on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Intended Use
What is the intended use?
0
ANYCUBIC Kobra 2 Neo
0Votes
Consumer
0
Creality Ender-3
0Votes
Consumer, Educational
Identifies the main user category.
In the battle of Intended Use,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Intended Use on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Assembly Required
Is assembly required?
Yes
0Votes
ANYCUBIC Kobra 2 Neo
Yes
0Votes
Creality Ender-3
States if the printer requires assembly.
In the battle of Assembly Required,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Assembly Required on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Upgrade Path
Does it support an upgrade path?
No
0Votes
ANYCUBIC Kobra 2 Neo
Yes
0Votes
Creality Ender-3
vs
Upgrade Path
The ANYCUBIC Kobra 2 Neo does not specify an upgrade path, but the Creality Ender-3 explicitly offers an upgrade path, allowing for future enhancements.
Whether the printer can be expanded with official or third-party upgrades.
In the battle of Upgrade Path,
ANYCUBIC Kobra 2 Neo ◉ is
worse than
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Upgrade Path on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Country of Origin
What is the country of origin?
0
ANYCUBIC Kobra 2 Neo
0Votes
China
0
Creality Ender-3
0Votes
China
The country where the product is designed or manufactured.
In the battle of Country of Origin,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Country of Origin on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Warranty Period
What is the warranty period?
0
ANYCUBIC Kobra 2 Neo
0Votes
1 Year
0
Creality Ender-3
0Votes
1 Year
Coverage period offered by the manufacturer.
In the battle of Warranty Period,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Warranty Period on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
The ANYCUBIC Kobra 2 Neo has a width of 17.1 inches (43.4 cm), which is marginally narrower than the Creality Ender-3's 17.32 inches (44 cm), making the Kobra 2 Neo slightly more compact.
The total external width of the printer.
In the battle of Width,
ANYCUBIC Kobra 2 Neo ◉ is
better than
Creality Ender-3 ◉
, delivering
lower
0.2 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Width on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
In the battle of Package Weight,
ANYCUBIC Kobra 2 Neo ◉ is
worse than
Creality Ender-3 ◉
, delivering
higher
5.1 lbs
measurement.
Don’t keep it to yourself — be the first to react and review the
Package Weight on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Weight
What is the printer’s weight?
18.5
lbs
0Votes
15.21
lbs
1Votes
vs
Weight
ANYCUBIC Kobra 2 Neo weighs 18.5 lbs (8.4 kg), making it heavier than the Creality Ender-3, which weighs 15.21 lbs (6.9 kg).
Net weight of the printer.
In the battle of Weight,
ANYCUBIC Kobra 2 Neo ◉ is
worse than
Creality Ender-3 ◉
, delivering
higher
3.3 lbs
measurement.
Based on community votes for Weight,
ANYCUBIC Kobra 2 Neo ◉ earned
0 votes,
less than
Creality Ender-3 ◉,
which got 1 votes.
I'm looking for something lighter and the Ender-3 wins on weight. At 15.21 lbs, it's significantly easier to move around than the Kobra 2 Neo's 18.5 lbs. Portability matters to me.
See more
Depth
What is the printer’s depth?
19.1
inch
0Votes
16.14
inch
0Votes
vs
Depth
ANYCUBIC Kobra 2 Neo has a depth of 19.1 inches (48.5 cm), which is greater than Creality Ender-3's depth of 16.14 inches (41 cm), indicating the Kobra 2 Neo requires more front-to-back space.
The total external depth of the printer.
In the battle of Depth,
ANYCUBIC Kobra 2 Neo ◉ is
worse than
Creality Ender-3 ◉
, delivering
higher
3.0 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Depth on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Height
What is the printer’s height?
18.1
inch
0Votes
18.31
inch
0Votes
vs
Height
The ANYCUBIC Kobra 2 Neo is 18.1 inches (46 cm) tall, while the Creality Ender-3 stands slightly taller at 18.31 inches (46.5 cm).
The total external height of the printer.
In the battle of Height,
ANYCUBIC Kobra 2 Neo ◉ is
better than
Creality Ender-3 ◉
, delivering
lower
0.2 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Height on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Package Width
What is the package width?
21.26
inch
0Votes
18.9
inch
0Votes
vs
Package Width
The package width for ANYCUBIC Kobra 2 Neo is 21.26 inches (54 cm), which is wider than Creality Ender-3's package width of 18.9 inches (48 cm).
Width of the printer’s packaging.
In the battle of Package Width,
ANYCUBIC Kobra 2 Neo ◉ is
worse than
Creality Ender-3 ◉
, delivering
higher
2.4 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Package Width on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Package Depth
What is the package depth?
21.26
inch
0Votes
18.9
inch
0Votes
ANYCUBIC Kobra 2 Neo
The shipping package has a depth of 21.26 inch (approximately 54.0 cm).
Depth of the printer’s packaging.
In the battle of Package Depth,
ANYCUBIC Kobra 2 Neo ◉ is
worse than
Creality Ender-3 ◉
, delivering
higher
2.4 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Package Depth on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Folded Depth
What is the folded depth?
Who knows?
0Votes
ANYCUBIC Kobra 2 Neo
(Help us out by suggesting one!)
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Depth of the printer when folded.
Don’t keep it to yourself — be the first to react and review the
Folded Depth on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Package Height
What is the package height?
9.65
inch
0Votes
9.84
inch
0Votes
Height of the printer’s packaging.
In the battle of Package Height,
ANYCUBIC Kobra 2 Neo ◉ is
better than
Creality Ender-3 ◉
, delivering
lower
0.2 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Package Height on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Build-to-Printer Size Ratio
What is the build-to-printer size ratio?
21.6
%
0Votes
26.83
%
0Votes
vs
Build-to-Printer Size Ratio
The ANYCUBIC Kobra 2 Neo has a build-to-printer size ratio of 21.6%, which is less efficient than the Creality Ender-3's 26.83%, meaning the Ender-3 offers a larger print volume relative to its footprint.
The efficiency ratio of build volume relative to the overall printer size.
In the battle of Build-to-Printer Size Ratio,
ANYCUBIC Kobra 2 Neo ◉ is
worse than
Creality Ender-3 ◉
, delivering
lower
5.2 %
measurement.
Don’t keep it to yourself — be the first to react and review the
Build-to-Printer Size Ratio on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Space Requirement
What is the space requirement?
1.8
sq ft
0Votes
2
sq ft
0Votes
vs
Space Requirement
The ANYCUBIC Kobra 2 Neo requires 1.8 sq ft (0.17 sq m) of space, slightly less than the Creality Ender-3's requirement of 2 sq ft (0.19 sq m).
The minimum flat surface area needed to safely place the printer.
In the battle of Space Requirement,
ANYCUBIC Kobra 2 Neo ◉ is
better than
Creality Ender-3 ◉
, delivering
lower
0.2 sq ft
measurement.
Don’t keep it to yourself — be the first to react and review the
Space Requirement on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
For power consumption, the Ender-3 is clearly more energy efficient. 270 Watts versus 400 Watts is a noticeable difference over time. This makes the Ender-3 a better choice for my setup.
ANYCUBIC Kobra 2 Neo operates within 46.4-104°F (8-40°C), offering a broader operating temperature range than Creality Ender-3's 59-86°F (15-30°C).
Recommended ambient temperature range for safe operation.
In the battle of Operating Temperature Range,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Operating Temperature Range on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Typical operating humidity for 3D printers is usually within 20-80% non-condensing to ensure optimal performance and avoid material degradation.
Acceptable humidity range during printer operation.
In the battle of Operating Humidity Range,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Operating Humidity Range on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
The ANYCUBIC Kobra 2 Neo uses an 'Internal' power supply, whereas the Creality Ender-3 utilizes an 'External' power supply.
Indicates whether the printer uses an internal or external power supply.
In the battle of Power Supply Type,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Power Supply Type on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Voltage input supported by the printer’s power supply.
In the battle of Power Supply Voltage,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Power Supply Voltage on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Whether the printer includes an energy-saving or eco mode.
In the battle of Energy Saving Mode,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Energy Saving Mode on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Storage Temperature Range
What is the storage temperature range?
0
ANYCUBIC Kobra 2 Neo
0Votes
32-95°F
0
Creality Ender-3
0Votes
32-104°F
ANYCUBIC Kobra 2 Neo
The typical storage temperature range for 3D printers, including the Kobra 2 Neo, is generally between 0-35°C (32-95°F) to protect electronics and components.
Creality Ender-3
The recommended storage temperature range for the printer is 32-104°F (0-40°C). Storing the printer within this range helps prevent damage to sensitive components and filament materials.
Safe temperature range for storing the printer when not in use.
In the battle of Storage Temperature Range,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Storage Temperature Range on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Storage Humidity Range
What is the storage humidity range?
0
ANYCUBIC Kobra 2 Neo
0Votes
10-90%
0
Creality Ender-3
0Votes
20-80%
ANYCUBIC Kobra 2 Neo
The storage humidity range for electronic devices like 3D printers typically falls between 10-90% RH non-condensing to prevent moisture-related damage.
Safe humidity range for storing the printer.
In the battle of Storage Humidity Range,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Storage Humidity Range on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Idle Power Consumption
What is the idle power consumption?
10
Watt
0Votes
15
Watt
0Votes
vs
Idle Power Consumption
The ANYCUBIC Kobra 2 Neo consumes 10 Watt in idle mode, making it slightly more energy-efficient than the Creality Ender-3 which consumes 15 Watt.
Power drawn while the printer is on but not printing.
In the battle of Idle Power Consumption,
ANYCUBIC Kobra 2 Neo ◉ is
better than
Creality Ender-3 ◉
, delivering
lower
5.0 Watt
measurement.
Don’t keep it to yourself — be the first to react and review the
Idle Power Consumption on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
The printer uses a single extruder for printing, which is common for entry-level FDM printers.
Creality Ender-3
The printer is equipped with 1 extruder. This configuration is standard for single-color or single-material prints.
total extruders installed.
In the battle of Number of Extruders,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Number of Extruders on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
The printer comes with a standard nozzle diameter of 0.4 mm, suitable for a balance of speed and detail in most prints.
Default nozzle diameter provided.
In the battle of Standard Nozzle Diameter,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
, delivering
equal
0.40 mm
measurement.
Don’t keep it to yourself — be the first to react and review the
Standard Nozzle Diameter on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
The printer is compatible with 1.75 mm diameter filament, which is the most common standard in desktop FDM 3D printing.
The filament size compatible with printer.
In the battle of Filament Diameter Supported,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
, delivering
equal
1.75 mm
measurement.
Don’t keep it to yourself — be the first to react and review the
Filament Diameter Supported on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
The ANYCUBIC Kobra 2 Neo has a max extruder temperature of 500°F (260°C), slightly higher than the Creality Ender-3's 491°F (255°C).
Maximum heating capability of extruder.
In the battle of Max Extruder Temperature,
ANYCUBIC Kobra 2 Neo ◉ is
better than
Creality Ender-3 ◉
, delivering
higher
9.0 °F
measurement.
Don’t keep it to yourself — be the first to react and review the
Max Extruder Temperature on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Who knows?
0Votes
ANYCUBIC Kobra 2 Neo
(Help us out by suggesting one!)
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Range of temperatures the printer chamber can maintain
Don’t keep it to yourself — be the first to react and review the
Chamber Temperature Control Range on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Build Volume
What is the build volume?
740.17
cubic in
0Votes
738.4
cubic in
0Votes
vs
Build Volume
The ANYCUBIC Kobra 2 Neo has a build volume of 740.17 cubic inches (12.13 liters), which is very slightly larger than the Creality Ender-3's 738.4 cubic inches (12.1 liters).
total printable volume capacity.
In the battle of Build Volume,
ANYCUBIC Kobra 2 Neo ◉ is
better than
Creality Ender-3 ◉
, delivering
higher
1.8 cubic in
measurement.
Don’t keep it to yourself — be the first to react and review the
Build Volume on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Build Width
What is the build width?
8.7
inch
0Votes
8.6
inch
0Votes
vs
Build Width
The ANYCUBIC Kobra 2 Neo offers a build width of 8.7 inches (22.1 cm), marginally larger than the Creality Ender-3's 8.6 inches (21.8 cm).
Maximum printable width of the build area.
In the battle of Build Width,
ANYCUBIC Kobra 2 Neo ◉ is
better than
Creality Ender-3 ◉
, delivering
higher
0.1 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Build Width on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Build Height
What is the build height?
9.8
inch
0Votes
9.8
inch
0Votes
vs
Build Height
Both the ANYCUBIC Kobra 2 Neo and Creality Ender-3 offer the same build height of 9.8 inches (24.9 cm).
Maximum printable height of the build area.
In the battle of Build Height,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
, delivering
equal
9.80 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Build Height on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Layer Resolution Minimum
What is the minimum layer resolution?
50
microns
0Votes
50
microns
0Votes
Creality Ender-3
The minimum layer resolution is 50 microns. This capability allows the printer to produce very fine details and achieve smooth surface finishes on printed objects.
Finest layer height achievable.
In the battle of Layer Resolution Minimum,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
, delivering
equal
50.00 microns
measurement.
Don’t keep it to yourself — be the first to react and review the
Layer Resolution Minimum on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Min Extruder Temperature
What is the min extruder temperature?
32
°F
0Votes
356
°F
0Votes
vs
Min Extruder Temperature
ANYCUBIC Kobra 2 Neo has a much lower minimum extruder temperature of 32°F (0°C) compared to Creality Ender-3's 356°F (180°C), indicating a broader operating range for the Kobra 2 Neo's extruder.
Lowest operable extruder temperature.
In the battle of Min Extruder Temperature,
ANYCUBIC Kobra 2 Neo ◉ is
better than
Creality Ender-3 ◉
, delivering
lower
324.0 °F
measurement.
Don’t keep it to yourself — be the first to react and review the
Min Extruder Temperature on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Max Bed Temperature
What is the max bed temperature?
230
°F
0Votes
212
°F
0Votes
vs
Max Bed Temperature
The ANYCUBIC Kobra 2 Neo can reach a max bed temperature of 230°F (110°C), which is higher than the Creality Ender-3's 212°F (100°C).
Maximum heated bed temperature.
In the battle of Max Bed Temperature,
ANYCUBIC Kobra 2 Neo ◉ is
better than
Creality Ender-3 ◉
, delivering
higher
18.0 °F
measurement.
Don’t keep it to yourself — be the first to react and review the
Max Bed Temperature on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Extruder Drive Type
What type of extruder drive does it use?
0
ANYCUBIC Kobra 2 Neo
1Votes
Direct Drive
0
Creality Ender-3
0Votes
Bowden
vs
Extruder Drive Type
The ANYCUBIC Kobra 2 Neo uses a 'Direct Drive' extruder, generally preferred for flexible filaments, while the Creality Ender-3 features a 'Bowden' drive.
The type of filament feeding system.
In the battle of Extruder Drive Type,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Based on community votes for Extruder Drive Type,
ANYCUBIC Kobra 2 Neo ◉ earned
1 votes,
more than
Creality Ender-3 ◉,
which got 0 votes.
The direct drive extruder on the Kobra 2 Neo is a big advantage for print quality. It's much better for flexible filaments than the Bowden type on the Ender-3. This is a must-have for me.
See more
Layer Resolution Maximum
What is the maximum layer resolution?
300
microns
0Votes
400
microns
0Votes
vs
Layer Resolution Maximum
ANYCUBIC Kobra 2 Neo has a maximum layer resolution of 300 microns, while Creality Ender-3 has a higher maximum of 400 microns, allowing for potentially faster, less detailed prints.
Thickest layer height achievable.
In the battle of Layer Resolution Maximum,
ANYCUBIC Kobra 2 Neo ◉ is
worse than
Creality Ender-3 ◉
, delivering
lower
100.0 microns
measurement.
Don’t keep it to yourself — be the first to react and review the
Layer Resolution Maximum on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
vs
Optional Nozzle Sizes
The ANYCUBIC Kobra 2 Neo supports optional nozzle sizes including 0.2mm, 0.4mm, 0.6mm, and 0.8mm, whereas optional nozzle sizes are not specified for the Creality Ender-3.
Alternative nozzle sizes supported.
Don’t keep it to yourself — be the first to react and review the
Optional Nozzle Sizes on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Bed Temperature Gradient
What is the bed temperature gradient?
5
°F
0Votes
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
vs
Bed Temperature Gradient
ANYCUBIC Kobra 2 Neo specifies a bed temperature gradient of 5°F, while this information is not available for the Creality Ender-3.
Variance in heat across the bed surface.
Don’t keep it to yourself — be the first to react and review the
Bed Temperature Gradient on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Heated Chamber
Does the printer have a heated chamber?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Whether the printer has a heated build chamber.
In the battle of Heated Chamber,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Heated Chamber on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Dual Extruders
Does it support dual extruders?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Indicates if printer can run dual extruders.
In the battle of Dual Extruders,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Dual Extruders on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Independent Dual Extruder
Does it have IDEX support?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Whether the printer supports independent extruder heads.
In the battle of Independent Dual Extruder,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Independent Dual Extruder on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Quick-Swap Nozzles
Does it have quick-swap nozzles?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Nozzles can be quickly swapped without tools.
In the battle of Quick-Swap Nozzles,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Quick-Swap Nozzles on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Hotend Replaceable
Is the hotend replaceable?
Yes
0Votes
ANYCUBIC Kobra 2 Neo
Yes
0Votes
Creality Ender-3
Whether the hotend can be replaced.
In the battle of Hotend Replaceable,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Hotend Replaceable on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
I gotta say the Ender-3 supports a much wider range of filaments. Being able to use Carbon Fiber and Nylon out of the box is a huge plus for me. The Kobra 2 Neo is a bit limited here.
Who knows?
0Votes
ANYCUBIC Kobra 2 Neo
(Help us out by suggesting one!)
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Maximum amount of resin the tank can hold.
Don’t keep it to yourself — be the first to react and review the
Max Resin Tank Capacity on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Filament Dry Box
Does it support filament dry boxes?
Yes
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
vs
Filament Dry Box
The ANYCUBIC Kobra 2 Neo includes a 'Filament Dry Box', a feature not specified for the Creality Ender-3.
Supports use of a dry box to prevent filament moisture issues.
In the battle of Filament Dry Box,
ANYCUBIC Kobra 2 Neo ◉ is
better than
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Filament Dry Box on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Max Number of Materials Supported
What is the maximum number of materials supported?
0
ANYCUBIC Kobra 2 Neo
0Votes
1
0
Creality Ender-3
0Votes
1
vs
Max Number of Materials Supported
Both the ANYCUBIC Kobra 2 Neo and Creality Ender-3 support a maximum of '1' material, indicating single-color or single-material prints.
Maximum distinct materials supported in one job.
In the battle of Max Number of Materials Supported,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Max Number of Materials Supported on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Max Supported Filament Diameter
What is the maximum supported filament diameter?
1.75
mm
0Votes
1.75
mm
0Votes
Maximum filament diameter that can be used.
In the battle of Max Supported Filament Diameter,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
, delivering
equal
1.75 mm
measurement.
Don’t keep it to yourself — be the first to react and review the
Max Supported Filament Diameter on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Filament Auto-Loading
Does it have filament auto-loading?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Automatic feeding of filament into extruder.
In the battle of Filament Auto-Loading,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Filament Auto-Loading on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Filament Drying Required
Is filament drying required?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Whether drying filament before use is necessary.
In the battle of Filament Drying Required,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Filament Drying Required on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Multi-Material Printing
Can it print with multiple materials?
Who knows?
0Votes
ANYCUBIC Kobra 2 Neo
(Help us out by suggesting one!)
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Ability to print with multiple materials simultaneously.
Don’t keep it to yourself — be the first to react and review the
Multi-Material Printing on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Third-Party Material
Does it support third-party materials?
Yes
0Votes
ANYCUBIC Kobra 2 Neo
Yes
0Votes
Creality Ender-3
Ability to use non-proprietary materials.
In the battle of Third-Party Material,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Third-Party Material on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Supported Resin Types
What resin types are supported?
0
ANYCUBIC Kobra 2 Neo
0Votes
None
0
Creality Ender-3
0Votes
None
Resin types that the printer can use.
In the battle of Supported Resin Types,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Supported Resin Types on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Compatible Resin Wavelength
What resin wavelength is compatible?
Who knows?
0Votes
ANYCUBIC Kobra 2 Neo
(Help us out by suggesting one!)
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Light wavelength compatibility for curing resins.
Don’t keep it to yourself — be the first to react and review the
Compatible Resin Wavelength on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Resin Auto-Fill
Does it have resin auto-fill?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Automatic filling of resin during prints.
In the battle of Resin Auto-Fill,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Resin Auto-Fill on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Biocompatible Materials Support
Does it support biocompatible materials?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Supports resins/filaments approved for medical or dental use.
In the battle of Biocompatible Materials Support,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Biocompatible Materials Support on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Print Speed & Performance
15
Official Max Print Speed
What is the official max print speed?
250
mm/s
1Votes
180
mm/s
0Votes
vs
Official Max Print Speed
ANYCUBIC Kobra 2 Neo boasts an official maximum print speed of 250 mm/s, which is faster than Creality Ender-3's 180 mm/s.
Manufacturer-claimed maximum print speed.
In the battle of Official Max Print Speed,
ANYCUBIC Kobra 2 Neo ◉ is
better than
Creality Ender-3 ◉
, delivering
higher
70.0 mm/s
measurement.
Based on community votes for Official Max Print Speed,
ANYCUBIC Kobra 2 Neo ◉ earned
1 votes,
more than
Creality Ender-3 ◉,
which got 0 votes.
The Kobra 2 Neo definitely takes the lead with its max print speed. 250mm/s is pretty impressive compared to the Ender-3's 180mm/s. I'd pick the Kobra 2 Neo for faster projects.
See more
Time to Print Benchy
How long does it take to print a Benchy?
17
minutes
1Votes
90
minutes
0Votes
Creality Ender-3
A standard Benchy 3D print takes approximately 90 minutes on this machine. This is a common benchmark used to compare print speed and quality across different 3D printers.
Average time to complete the benchmark “Benchy” model.
In the battle of Time to Print Benchy,
ANYCUBIC Kobra 2 Neo ◉ is
better than
Creality Ender-3 ◉
, delivering
lower
73.0 minutes
measurement.
Based on community votes for Time to Print Benchy,
ANYCUBIC Kobra 2 Neo ◉ earned
1 votes,
more than
Creality Ender-3 ◉,
which got 0 votes.
That Benchy print time difference is wild. The Kobra 2 Neo finishes in just 17 minutes, while the Ender-3 takes 90 minutes. This speed makes the Kobra 2 Neo an easy pick.
See more
Print Accuracy
What is the print accuracy?
100
microns
0Votes
100
microns
0Votes
Creality Ender-3
The print accuracy is 100 microns, which indicates the smallest detail the printer can consistently reproduce. This is equivalent to 0.1 mm.
Degree of dimensional accuracy of printed parts.
In the battle of Print Accuracy,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
, delivering
equal
100.00 microns
measurement.
Don’t keep it to yourself — be the first to react and review the
Print Accuracy on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
First Layer Calibration
How is the first layer calibrated?
0
ANYCUBIC Kobra 2 Neo
0Votes
Auto
0
Creality Ender-3
0Votes
Manual
vs
First Layer Calibration
The ANYCUBIC Kobra 2 Neo offers 'Auto' first layer calibration for ease of use, whereas the Creality Ender-3 requires 'Manual' calibration.
Method used for first-layer bed calibration.
In the battle of First Layer Calibration,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
First Layer Calibration on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Print Adhesion Type
What type of print adhesion is used?
0
ANYCUBIC Kobra 2 Neo
0Votes
PEI
0
Creality Ender-3
0Votes
Other
ANYCUBIC Kobra 2 Neo
The PEI (Polyetherimide) surface on the build plate provides excellent adhesion for a wide range of filament types during printing.
Method used to secure prints to the bed.
In the battle of Print Adhesion Type,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Print Adhesion Type on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Bridging Performance
What is the bridging performance?
30
mm
0Votes
50
mm
0Votes
vs
Bridging Performance
The ANYCUBIC Kobra 2 Neo has a bridging performance of 30 mm, less than the Creality Ender-3's 50 mm, suggesting the Ender-3 may handle longer bridges better.
Longest unsupported horizontal span printed without sagging.
In the battle of Bridging Performance,
ANYCUBIC Kobra 2 Neo ◉ is
worse than
Creality Ender-3 ◉
, delivering
lower
20.0 mm
measurement.
Don’t keep it to yourself — be the first to react and review the
Bridging Performance on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Print Recovery
Does the printer support print recovery?
Yes
0Votes
ANYCUBIC Kobra 2 Neo
Yes
0Votes
Creality Ender-3
Creality Ender-3
The print recovery feature enables the printer to resume a print job from where it left off after an unexpected interruption, such as a power outage. This helps prevent print failures and saves material.
Ability to resume print after power loss or interruption.
In the battle of Print Recovery,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Print Recovery on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Operating Noise Level
What is the operating noise level?
50
dB
0Votes
50
dB
0Votes
Creality Ender-3
The operating noise level is 50 dB. This noise level is comparable to a quiet office environment, making it suitable for use in various settings without significant disturbance.
Measures the sound generated during printing; lower is quieter.
In the battle of Operating Noise Level,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
, delivering
equal
50.00 dB
measurement.
Don’t keep it to yourself — be the first to react and review the
Operating Noise Level on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Measured Effective Print Speed
What is the effective measured print speed?
150
mm/s
1Votes
60
mm/s
0Votes
vs
Measured Effective Print Speed
The ANYCUBIC Kobra 2 Neo has a measured effective print speed of 150 mm/s, significantly faster than the Creality Ender-3's 60 mm/s.
Independently measured real-world print speed.
In the battle of Measured Effective Print Speed,
ANYCUBIC Kobra 2 Neo ◉ is
better than
Creality Ender-3 ◉
, delivering
higher
90.0 mm/s
measurement.
Based on community votes for Measured Effective Print Speed,
ANYCUBIC Kobra 2 Neo ◉ earned
1 votes,
more than
Creality Ender-3 ◉,
which got 0 votes.
The measured effective print speed for the Kobra 2 Neo is incredibly high. 150mm/s compared to the Ender-3's 60mm/s is no contest. I need that speed for my projects.
See more
Overhang Performance
What is the overhang performance?
60
degrees
0Votes
45
degrees
0Votes
vs
Overhang Performance
ANYCUBIC Kobra 2 Neo has an overhang performance of 60 degrees, which is superior to Creality Ender-3's 45 degrees, allowing for steeper unsupported angles.
Maximum angle of unsupported overhangs achievable.
In the battle of Overhang Performance,
ANYCUBIC Kobra 2 Neo ◉ is
better than
Creality Ender-3 ◉
, delivering
higher
15.0 degrees
measurement.
Don’t keep it to yourself — be the first to react and review the
Overhang Performance on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Spaghetti/Fault Detection
Does it have spaghetti or fault detection?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Detects failed prints or filament tangles.
In the battle of Spaghetti/Fault Detection,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Spaghetti/Fault Detection on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Continuous Print Time
What is the max continuous print time?
72
hours
0Votes
72
hours
0Votes
Maximum supported printing time without interruption.
In the battle of Continuous Print Time,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
, delivering
equal
72.00 hours
measurement.
Don’t keep it to yourself — be the first to react and review the
Continuous Print Time on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Print Success Rate
What is the print success rate?
85
%
0Votes
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
vs
Print Success Rate
The ANYCUBIC Kobra 2 Neo has a stated print success rate of 85%, while this information is not available for the Creality Ender-3.
Percentage of prints successfully completed.
Don’t keep it to yourself — be the first to react and review the
Print Success Rate on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Idle Noise Level
What is the idle noise level?
40
dB
0Votes
50
dB
0Votes
vs
Idle Noise Level
ANYCUBIC Kobra 2 Neo has an idle noise level of 40 dB, making it quieter than Creality Ender-3's 50 dB when not actively printing.
Measures the noise when printer is on but not printing; lower is better.
In the battle of Idle Noise Level,
ANYCUBIC Kobra 2 Neo ◉ is
better than
Creality Ender-3 ◉
, delivering
lower
10.0 dB
measurement.
Don’t keep it to yourself — be the first to react and review the
Idle Noise Level on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Print Quality Rating
What is the print quality rating?
0
ANYCUBIC Kobra 2 Neo
0Votes
7
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Rated score for overall print quality (0–10).
Don’t keep it to yourself — be the first to react and review the
Print Quality Rating on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
This printer does not include any built-in air filtration system. It is recommended to use it in a well-ventilated area, especially when printing materials like ABS.
Creality Ender-3
The printer does not come with a built-in air filtration system. This means it relies on external ventilation or open-air operation.
Air filtering system for reducing fumes and particulates.
In the battle of Air Filtration,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Air Filtration on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
The screen on the Kobra 2 Neo is a winner for sure. A 4.3-inch touchscreen beats a 2.8-inch non-touch display any day. It just makes interaction so much better.
ANYCUBIC Kobra 2 Neo offers a versatile build plate type of 'PEI, Magnetic, Flex', while Creality Ender-3 uses 'Flex'.
Type of build surface material.
In the battle of Build Plate Type,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Build Plate Type on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
This feature allows the printer to resume a print job from where it left off after a power outage, saving time and material.
Recovers print jobs after power interruptions.
In the battle of Power Loss Recovery,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Power Loss Recovery on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Frame Type
What is the frame type?
0
ANYCUBIC Kobra 2 Neo
0Votes
Cartesian
0
Creality Ender-3
0Votes
Cartesian
ANYCUBIC Kobra 2 Neo
The printer utilizes a Cartesian frame type, which means its print head moves along X, Y, and Z axes to create objects.
Mechanical structure style of the printer.
In the battle of Frame Type,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Frame Type on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Enclosure
Is the printer open or enclosed?
0
ANYCUBIC Kobra 2 Neo
0Votes
Open
0
Creality Ender-3
0Votes
Open
Creality Ender-3
The printer features an Open enclosure design. Open enclosures are common for FDM printers and are suitable for materials like PLA, but may require external ventilation for filaments prone to warping or emitting fumes.
Whether the printer has an open or enclosed build chamber.
In the battle of Enclosure,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Enclosure on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Touchscreen Display
Does it have a touchscreen display?
Yes
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
vs
Touchscreen Display
The ANYCUBIC Kobra 2 Neo features a 'Touchscreen Display', a modern interface not available on the Creality Ender-3.
Indicates if a touchscreen is provided for controls.
In the battle of Touchscreen Display,
ANYCUBIC Kobra 2 Neo ◉ is
better than
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Touchscreen Display on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Build Plate Surface Texture
What is the build plate texture?
0
ANYCUBIC Kobra 2 Neo
0Votes
Textured
0
Creality Ender-3
0Votes
Textured
Creality Ender-3
The build plate features a Textured surface. This type of surface often improves print adhesion and can leave a distinct matte finish on the bottom of printed objects.
Surface finish of the build plate.
In the battle of Build Plate Surface Texture,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Build Plate Surface Texture on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Build Plate Removable
Is the build plate removable?
Yes
0Votes
ANYCUBIC Kobra 2 Neo
Yes
0Votes
Creality Ender-3
Creality Ender-3
The build plate is removable, which significantly simplifies the process of detaching finished prints. This also makes cleaning and preparing the bed for the next job more convenient.
Whether the build plate can be detached for print removal.
In the battle of Build Plate Removable,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Build Plate Removable on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Filament Runout Sensor
Does it have a filament runout sensor?
Yes
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
ANYCUBIC Kobra 2 Neo
A filament runout sensor detects when the filament spool is empty and pauses the print, allowing for filament replacement to prevent failed prints.
Detects when filament runs out and pauses printing.
In the battle of Filament Runout Sensor,
ANYCUBIC Kobra 2 Neo ◉ is
better than
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Filament Runout Sensor on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Motion System
What is the motion system?
0
ANYCUBIC Kobra 2 Neo
0Votes
Belts, Rods
0
Creality Ender-3
0Votes
Belts, Rods
Creality Ender-3
The printer utilizes a motion system based on Belts and Rods. This is a common setup for Cartesian FDM printers, providing precise movement of the print head across the build area.
Mechanical motion system guiding the print head.
In the battle of Motion System,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Motion System on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Auto Bed Leveling
Does it support auto bed leveling?
Yes
1Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
vs
Auto Bed Leveling
The ANYCUBIC Kobra 2 Neo includes 'Auto Bed Leveling', a convenient feature not available on the Creality Ender-3.
Automatic calibration of the print bed.
In the battle of Auto Bed Leveling,
ANYCUBIC Kobra 2 Neo ◉ is
better than
Creality Ender-3 ◉
.
Based on community votes for Auto Bed Leveling,
ANYCUBIC Kobra 2 Neo ◉ earned
1 votes,
more than
Creality Ender-3 ◉,
which got 0 votes.
Auto bed leveling on the Kobra 2 Neo is a game changer. I really don't want to mess with manual leveling on the Ender-3 anymore. This feature alone makes the Kobra 2 Neo my preference.
See more
Screen Resolution
What is the display resolution?
Who knows?
0Votes
ANYCUBIC Kobra 2 Neo
(Help us out by suggesting one!)
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Resolution of the display screen.
Don’t keep it to yourself — be the first to react and review the
Screen Resolution on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Built-in Camera
Does it have a built-in camera?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Camera for monitoring prints and creating time-lapses.
In the battle of Built-in Camera,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Built-in Camera on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Lighting Inside Chamber
Does it have chamber lighting?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Chamber lighting to monitor prints in progress.
In the battle of Lighting Inside Chamber,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Lighting Inside Chamber on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Chamber Lighting Color Modes
What chamber lighting modes are available?
Who knows?
0Votes
ANYCUBIC Kobra 2 Neo
(Help us out by suggesting one!)
0
Creality Ender-3
0Votes
None
Options for chamber lighting colors.
Don’t keep it to yourself — be the first to react and review the
Chamber Lighting Color Modes on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Manual Bed Leveling
Does it support manual bed leveling?
No
0Votes
ANYCUBIC Kobra 2 Neo
Yes
0Votes
Creality Ender-3
vs
Manual Bed Leveling
Manual bed leveling is not specified for the ANYCUBIC Kobra 2 Neo, but it is a feature of the Creality Ender-3.
Support for traditional manual bed leveling.
In the battle of Manual Bed Leveling,
ANYCUBIC Kobra 2 Neo ◉ is
worse than
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Manual Bed Leveling on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Cooling Fans
Does it have cooling fans?
Yes
0Votes
ANYCUBIC Kobra 2 Neo
Yes
0Votes
Creality Ender-3
Fans for cooling extruder and printed layers.
In the battle of Cooling Fans,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Cooling Fans on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Vibration Compensation
Does it support vibration compensation?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Compensation system to reduce print artifacts.
In the battle of Vibration Compensation,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Vibration Compensation on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Toolhead Modularity
What modular toolheads are supported?
0
ANYCUBIC Kobra 2 Neo
0Votes
None
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Whether the toolhead can be swapped for other functions.
Don’t keep it to yourself — be the first to react and review the
Toolhead Modularity on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Ability to monitor prints remotely via app or web.
In the battle of Remote Monitoring,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Remote Monitoring on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Methods available to transfer files to the printer.
In the battle of File Transfer Method,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
File Transfer Method on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Indicates whether the printer supports firmware updates; important for new features and bug fixes.
In the battle of Firmware Update,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Firmware Update on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
ANYCUBIC Kobra 2 Neo supports 'Cura, PrusaSlicer, Anycubic Slicer', while Creality Ender-3 supports a wider array including 'Cura, PrusaSlicer, Simplify3D, Creality Print, Orca Slicer'.
Slicer programs that are compatible with the printer.
In the battle of Supported Slicers,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Supported Slicers on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
The printer supports common 3D print file formats such as G-code, STL, OBJ, and 3MF.
File types accepted for printing.
In the battle of Supported File Formats,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Supported File Formats on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Connectivity Options
What connectivity options are available?
0
ANYCUBIC Kobra 2 Neo
0Votes
USB
0
Creality Ender-3
0Votes
USB, SD Card
vs
Connectivity Options
ANYCUBIC Kobra 2 Neo offers 'USB' as a connectivity option, while Creality Ender-3 provides both 'USB, SD Card' for greater flexibility.
Available connection types for file transfer and control.
In the battle of Connectivity Options,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Connectivity Options on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Cloud-Based Software
Does it support cloud-based software?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Indicates whether the printer uses or supports cloud software.
In the battle of Cloud-Based Software,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Cloud-Based Software on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Proprietary Software Required
Is proprietary software required?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Whether use of manufacturer’s software is mandatory.
In the battle of Proprietary Software Required,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Proprietary Software Required on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Mobile App
Does it support a mobile app?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Ability to use a mobile app for control/monitoring.
In the battle of Mobile App,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Mobile App on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
API/SDK Integration
Does it support API/SDK integration?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Allows developers to integrate with APIs or SDKs.
In the battle of API/SDK Integration,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
API/SDK Integration on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
In the battle of Multi-Printer Fleet Control,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Multi-Printer Fleet Control on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Time-Lapse Recording
Does it support time-lapse recording?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Ability to capture time-lapse videos of prints.
In the battle of Time-Lapse Recording,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Time-Lapse Recording on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Remote Firmware Update
Does it support remote firmware updates?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Supports updating firmware remotely.
In the battle of Remote Firmware Update,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Remote Firmware Update on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Who knows?
0Votes
ANYCUBIC Kobra 2 Neo
(Help us out by suggesting one!)
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Strength of UV light exposure affecting curing speed and accuracy.
Don’t keep it to yourself — be the first to react and review the
UV Power Output on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Whether the printer supports integration with wash/cure stations.
In the battle of Post-Processing Equipment Compatibility,
ANYCUBIC Kobra 2 Neo ◉ is
worse than
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Post-Processing Equipment Compatibility on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
UV Light Source Type
What UV light source type does it use?
0
ANYCUBIC Kobra 2 Neo
0Votes
None
0
Creality Ender-3
0Votes
None
Type of UV light source used to cure resin layers.
In the battle of UV Light Source Type,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
UV Light Source Type on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Resin Layer Curing Speed
What is the resin layer curing speed?
Who knows?
0Votes
ANYCUBIC Kobra 2 Neo
(Help us out by suggesting one!)
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Time required to cure one resin layer.
Don’t keep it to yourself — be the first to react and review the
Resin Layer Curing Speed on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Resin Tank Lifetime
What is the resin tank lifetime?
Who knows?
0Votes
ANYCUBIC Kobra 2 Neo
(Help us out by suggesting one!)
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Approximate number of prints before resin tank replacement.
Don’t keep it to yourself — be the first to react and review the
Resin Tank Lifetime on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Resin Cartridge System
Does it use a resin cartridge system?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Whether it uses a sealed resin cartridge system for easy handling.
In the battle of Resin Cartridge System,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Resin Cartridge System on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Auto Resin Mixing
Does it have auto resin mixing?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Whether resin is automatically mixed during operation for consistency.
In the battle of Auto Resin Mixing,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Auto Resin Mixing on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Resin Heating System
Does it have a resin heating system?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Whether the printer can heat resin for optimal viscosity.
In the battle of Resin Heating System,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Resin Heating System on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Wash Time
What is the wash time?
Who knows?
0Votes
ANYCUBIC Kobra 2 Neo
(Help us out by suggesting one!)
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Typical duration to wash prints in post-processing.
Don’t keep it to yourself — be the first to react and review the
Wash Time on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Cure Time
What is the cure time?
Who knows?
0Votes
ANYCUBIC Kobra 2 Neo
(Help us out by suggesting one!)
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Typical duration to fully cure resin prints after washing.
Don’t keep it to yourself — be the first to react and review the
Cure Time on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Safety & Compliance
10
Safety Certifications
What safety certifications does it have?
0
ANYCUBIC Kobra 2 Neo
0Votes
UL, CE, FCC
0
Creality Ender-3
0Votes
CE, FCC, RoHS
vs
Safety Certifications
ANYCUBIC Kobra 2 Neo has 'UL, CE, FCC' safety certifications, while Creality Ender-3 has 'CE, FCC, RoHS' certifications.
Official safety standards the printer complies with.
In the battle of Safety Certifications,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Safety Certifications on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Enclosure Lock
Does it have an enclosure lock?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Prevents accidental access to the chamber while printing.
In the battle of Enclosure Lock,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Enclosure Lock on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Emergency Stop Button
Does it have an emergency stop button?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Dedicated button to stop the printer instantly in emergencies.
In the battle of Emergency Stop Button,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Emergency Stop Button on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Fireproof Build Plate
Does it have a fireproof build plate?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Build plate is resistant to fire for extra safety.
In the battle of Fireproof Build Plate,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Fireproof Build Plate on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Overheat Protection
Does it feature overheat protection?
Yes
0Votes
ANYCUBIC Kobra 2 Neo
Yes
0Votes
Creality Ender-3
Shuts down printer when components exceed safe temps.
In the battle of Overheat Protection,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Overheat Protection on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Auto Shutdown on Error
Does it auto shut down on errors?
Yes
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Shuts printer down automatically when critical errors occur.
In the battle of Auto Shutdown on Error,
ANYCUBIC Kobra 2 Neo ◉ is
better than
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Auto Shutdown on Error on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Resin Spill Protection
Does it have resin spill protection?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Prevents or contains resin leaks in resin printers.
In the battle of Resin Spill Protection,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Resin Spill Protection on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Child Lock Mode
Does it have a child lock mode?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
A setting that prevents unauthorized or unsafe use by children.
In the battle of Child Lock Mode,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Child Lock Mode on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Air Quality Compliance
Is it compliant with air quality standards?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Meets air quality standards for emissions and filtration.
In the battle of Air Quality Compliance,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Air Quality Compliance on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Safety Sensors Count
How many safety sensors are included?
0
ANYCUBIC Kobra 2 Neo
0Votes
1
0
Creality Ender-3
0Votes
vs
Safety Sensors Count
ANYCUBIC Kobra 2 Neo has '1' safety sensor, whereas the count is not available for the Creality Ender-3.
Number of safety sensors installed in the printer.
Don’t keep it to yourself — be the first to react and review the
Safety Sensors Count on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Whether spare parts are readily available for purchase.
In the battle of Spare Parts Availability,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Spare Parts Availability on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Upgrade Options
What upgrade options are supported?
0
ANYCUBIC Kobra 2 Neo
0Votes
None
0
Creality Ender-3
0Votes
Multi-Material, Laser, CNC, Enclosure, Camera
vs
Upgrade Options
The ANYCUBIC Kobra 2 Neo has 'None' for upgrade options, while the Creality Ender-3 offers various upgrade options including 'Multi-Material, Laser, CNC, Enclosure, Camera'.
Supported upgrade kits and modules for expanding functionality.
In the battle of Upgrade Options,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Upgrade Options on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Lubrication Required
Does it require lubrication?
Yes
0Votes
ANYCUBIC Kobra 2 Neo
Yes
0Votes
Creality Ender-3
Creality Ender-3
Regular lubrication is required to maintain the printer's moving parts. This ensures smooth, reliable operation and extends the lifespan of the mechanical components.
Indicates if lubrication is needed for smooth operation.
In the battle of Lubrication Required,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Lubrication Required on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Nozzle Replaceable
Is the nozzle replaceable?
Yes
0Votes
ANYCUBIC Kobra 2 Neo
Yes
0Votes
Creality Ender-3
Specifies if the nozzle can be replaced with different sizes or when worn.
In the battle of Nozzle Replaceable,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Nozzle Replaceable on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
ANYCUBIC Kobra 2 Neo does not support any mod kits, while Creality Ender-3 supports 'Enclosure, Multi-Material, Laser, CNC' mod kits, offering significant customization.
Officially supported modification kits.
In the battle of Supported Mod Kits,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Supported Mod Kits on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Self-Diagnostics
Does it have self-diagnostics?
Yes
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Printer can analyze itself for common faults and errors.
In the battle of Self-Diagnostics,
ANYCUBIC Kobra 2 Neo ◉ is
better than
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Self-Diagnostics on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Maintenance Reminders
Does it provide maintenance reminders?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Automated alerts to schedule maintenance tasks.
In the battle of Maintenance Reminders,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Maintenance Reminders on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Predictive Maintenance Alerts
Does it feature predictive maintenance alerts?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Predicts potential failures and alerts the user before issues arise.
In the battle of Predictive Maintenance Alerts,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Predictive Maintenance Alerts on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Tool-Free Maintenance
Is tool-free maintenance supported?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Allows key maintenance tasks without tools.
In the battle of Tool-Free Maintenance,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Tool-Free Maintenance on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Service Interval
What is the service interval?
200
hours
0Votes
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
vs
Service Interval
ANYCUBIC Kobra 2 Neo has a service interval of '200' hours, while this information is not available for the Creality Ender-3.
Recommended time between major servicing.
Don’t keep it to yourself — be the first to react and review the
Service Interval on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Business & Professional Features
10
Print Farm Management
Does it support print farm management?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Indicates if multiple printers can be networked and managed as a farm.
In the battle of Print Farm Management,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Print Farm Management on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Cloud Fleet Management
Does it support cloud fleet management?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Ability to manage multiple devices remotely via cloud software.
In the battle of Cloud Fleet Management,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Cloud Fleet Management on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Workflow Integration
Does it integrate with workflows?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Integration with professional workflow tools and design platforms.
In the battle of Workflow Integration,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Workflow Integration on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Multi-User Profiles
Does it support multi-user profiles?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Allows multiple users to have distinct profiles and permissions.
In the battle of Multi-User Profiles,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Multi-User Profiles on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Remote Access Control
Does it support remote access control?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Ability to control printer access remotely with permissions.
In the battle of Remote Access Control,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Remote Access Control on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Enterprise Security Features
Does it have enterprise security features?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Advanced security measures like encryption, secure login, and permissions.
In the battle of Enterprise Security Features,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Enterprise Security Features on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Licensing Options
Are licensing options available?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Availability of enterprise licensing for organizations.
In the battle of Licensing Options,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Licensing Options on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Usage Analytics Dashboard
Does it include a usage analytics dashboard?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Provides usage statistics and analytics for tracking productivity and costs.
In the battle of Usage Analytics Dashboard,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Usage Analytics Dashboard on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
SLA & Support Contracts
Are SLA or support contracts available?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Option for service-level agreements and premium support contracts.
In the battle of SLA & Support Contracts,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
SLA & Support Contracts on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Predictive Cost Estimation
Does it have predictive cost estimation?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Estimates printing costs (material, power, time) before job start.
In the battle of Predictive Cost Estimation,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Predictive Cost Estimation on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
In the battle of Filament Jam Detection,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Filament Jam Detection on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Sensor Count
How many sensors are included?
0
ANYCUBIC Kobra 2 Neo
0Votes
1
0
Creality Ender-3
0Votes
5
vs
Sensor Count
ANYCUBIC Kobra 2 Neo has '1' total sensor, which is fewer than the '5' sensors reported for the Creality Ender-3.
total number of sensors installed in the printer.
In the battle of Sensor Count,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Sensor Count on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Vibration Sensor
Does it include a vibration sensor?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Detects vibrations and compensates for print accuracy.
In the battle of Vibration Sensor,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Vibration Sensor on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Print Log Storage
Does it have print log storage?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Records print job history and diagnostic data.
In the battle of Print Log Storage,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Print Log Storage on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Remote Error Alerts
Does it provide remote error alerts?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Sends error notifications to remote devices.
In the battle of Remote Error Alerts,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Remote Error Alerts on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Predictive Failure Logs
Does it support predictive failure logs?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Tracks and predicts potential failures before they occur.
In the battle of Predictive Failure Logs,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Predictive Failure Logs on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Calibration History Log
Does it have a calibration history log?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Stores history of calibration for quality control.
In the battle of Calibration History Log,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Calibration History Log on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Bed Temperature Sensors
Does it have bed temperature sensors?
Yes
0Votes
ANYCUBIC Kobra 2 Neo
Yes
0Votes
Creality Ender-3
Detects and regulates the build plate temperature.
In the battle of Bed Temperature Sensors,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Bed Temperature Sensors on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Chamber Temperature Sensors
Does it have chamber temperature sensors?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Tracks and maintains chamber temperature for consistent prints.
In the battle of Chamber Temperature Sensors,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Chamber Temperature Sensors on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Extruder Pressure Sensor
Does it have an extruder pressure sensor?
No
0Votes
ANYCUBIC Kobra 2 Neo
No
0Votes
Creality Ender-3
Monitors extrusion pressure to prevent under- or over-extrusion.
In the battle of Extruder Pressure Sensor,
ANYCUBIC Kobra 2 Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Extruder Pressure Sensor on ANYCUBIC Kobra 2 Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Surveys
Because hot takes deserve votes.
Printing Speed
How would you rate the printing speed of this 3D printer?
Lightning fast — Under 2 hours
0Votes
0Votes
Very fast — 2 to 5 hours
0Votes
0Votes
Fast — 5 to 10 hours
0Votes
0Votes
Moderate speed — 10 to 20 hours
0Votes
0Votes
Very slow — Over 20 hours
0Votes
0Votes
Print Quality and Detail
How would you describe the print quality and level of detail produced by this 3D printer?
Ultra fine detail — Layer height below 0.05 mm
0Votes
0Votes
Fine detail — Layer height 0.05 to 0.1 mm
0Votes
0Votes
Good detail — Layer height 0.1 to 0.2 mm
0Votes
0Votes
Decent detail — Layer height 0.2 to 0.3 mm
0Votes
0Votes
Rough and basic — Layer height above 0.3 mm
0Votes
0Votes
Build Volume Capacity
How do you find the build volume capacity of this 3D printer?
Extra large projects — Over 400 mm each side
0Votes
0Votes
Large projects — 300 to 400 mm each side
0Votes
0Votes
Medium projects — 200 to 300 mm each side
0Votes
0Votes
Small projects — 150 to 200 mm each side
0Votes
0Votes
Tiny prints only — Under 150 x 150 x 150 mm
0Votes
0Votes
Material Consumption Efficiency
How efficient is this 3D printer in using filament or resin materials?
Very efficient — Under 50 grams per model
0Votes
0Votes
Efficient — 50 to 70 grams per model
0Votes
0Votes
Decent efficiency — 70 to 100 grams per model
0Votes
0Votes
Average efficiency — 100 to 150 grams per model
0Votes
0Votes
Wasteful — Over 150 grams per model
0Votes
0Votes
Noise Level
How noisy is this 3D printer during operation?
Whisper quiet
0Votes
0Votes
Quiet most of the time
0Votes
0Votes
Manageable with background noise
0Votes
0Votes
Noticeable but tolerable
0Votes
0Votes
Loud and distracting
0Votes
0Votes
Durability and Lifespan
How durable does this 3D printer seem in terms of lifespan?
Very durable — Over 5 years
0Votes
0Votes
Long lasting — 3 to 5 years
0Votes
0Votes
Decent lifespan — 2 to 3 years
0Votes
0Votes
Short lifespan — 1 to 2 years
0Votes
0Votes
Breaks down quickly — Under 1 year
0Votes
0Votes
Performance
How would you rate the overall performance of this 3D printer in terms of print quality and reliability?
Excellent — Consistently produces high-quality prints with no issues
0Votes
0Votes
Good — Produces quality prints with minor inconsistencies
0Votes
0Votes
Average — Prints are acceptable with occasional issues
0Votes
0Votes
Below average — Frequent print failures or inconsistencies
0Votes
0Votes
Poor — Often fails to produce quality prints
0Votes
0Votes
Ease of Setup
How easy was the setup process for this 3D printer?
Very easy — The printer was simple to set up with clear instructions and minimal effort
0Votes
0Votes
Easy — Setup was straightforward, with only a few minor adjustments needed
0Votes
0Votes
Average — Setup was manageable but took time and required some troubleshooting
0Votes
0Votes
Challenging — Setup was difficult and required assistance from support or additional resources
0Votes
0Votes
Very difficult — Setup was complicated, with unclear instructions and many issues during the process
0Votes
0Votes
Pricing
How would you rate the pricing for this 3D printer?
Great value for money — Offers excellent features and performance at an affordable price
0Votes
0Votes
Pretty good price — Decent pricing for the features, a reasonable value
0Votes
0Votes
Fair deal — The price is acceptable but might be slightly high for the features offered
0Votes
0Votes
Kinda pricey — The price feels a bit high compared to similar models
0Votes
0Votes
Crazy expensive — The price is significantly higher than other options with similar features
0Votes
0Votes
Design Appeal
How would you rate the design appeal of this 3D printer?
Excellent — Sleek, modern design that looks great in any workspace
0Votes
0Votes
Good — Attractive and functional design that fits well in most environments
0Votes
0Votes
Average — Standard design with no particular standout features
0Votes
0Votes
Fair — Design feels bulky or outdated, but still serves its purpose
0Votes
0Votes
Poor — Unattractive design, clunky and may be an eyesore in most spaces
Recaptor
0
Cartling
